Amflow UE Carbon Pro e-bike, Digimart Global: A review published by Notebookcheck asks whether the Amflow UE Carbon Pro’s Avinox M2 motor is too powerful for a city e-bike. The reviewer reports that the bike delivers a rated torque of 125 Nm in boost mode, which the article notes exceeds the base torque of a VW up!
(95 Nm) on paper.
According to the review, Amflow chose a powerful mid-drive motor because Avinox focuses on that type of unit and does not offer a milder option, such as a hub motor, in its current lineup. The reviewer argues that an e-bike motor is not inherently too powerful, but can deliver power too abruptly in some situations.
The key factor, the article says, is how controllably that power is delivered.
The reviewer found the power delivery controllable. The Avinox M2 can provide strong assistance but can also deliver a gentle push, and riders can fine-tune individual assist levels or create custom profiles.
During off-road testing over tricky terrain with tires that are not especially grippy, the reviewer reports never losing traction, though plans to retest in slippery conditions are noted.
The article also addresses weight and components. The mid-drive motor weighs about 2.59 kg (5.71 lbs), compared with about 2.3 kg (5.07 lbs) for the Bosch Hub Line hub motor.
The reviewer’s fully equipped test bike weighed 26.5 kg (58.4 lbs), while Amflow lists the base model at 20.9 kg (46.1 lbs) without accessories. The reviewer calls the extra weight a negligible difference of roughly 1.1 percent and notes that a mid-drive layout positions the center of gravity closer to the middle of the bike.
A powerful mid-drive motor can limit gearing choices, but the reviewer says the electronic three-speed internally geared hub on the Amflow UE Carbon Pro pairs well with a Gates carbon belt, making this a non-issue in this case. The reviewer concludes that Amflow has not made the bike worse as a city e-bike and that the motor is what makes off-road riding possible.














