OnePlus Turbo 7 Pro, Digi Mart USA News: A new OnePlus smartphone with model number PYP110 has received 3C certification in China, according to a listing issued on November 17. Weibo tipster Digital Chat Station says the device is likely the unreleased OnePlus Turbo 7 Pro. This report is based on the tipster’s account and the certification listing, and has not been independently verified.
The certificate lists two compatible power adapters, the VCBAOBCH and the VCBAJDCH. On 200–240 V input, both can output up to 11 V/9.1 A, or 100 W, which points to a peak charging rate of 100 W for the phone.
On 100–130 V input, output drops to about 80 W for the VCBAOBCH and 55 W for the VCBAJDCH. The source notes that other OnePlus phones show the same limitation, and that buyers importing the device into 100–130 V regions such as the US and Japan would be limited to these lower rates.
Digital Chat Station also lists expected features for the phone, including a display with a 185 Hz peak refresh rate and a 165 Hz system-wide refresh rate, matching the flagship OnePlus 16. Earlier leaks pointed to a 6.78-inch flat panel with 1.5K resolution. The tipster mentions a Snapdragon 8 series chipset and a 200 MP main camera with a large sensor, likely the 1/1.55-inch ISOCELL HP5. Battery capacity is expected to exceed 9,000 mAh, although the exact figure is not yet known.
The phone is rumored to use the upcoming 3 nm Snapdragon chipset codenamed SM8845 Pro, which is expected to launch as the Snapdragon 8 Gen 5 Pro. The name suggests an upgraded version of the Snapdragon 8 Gen 5, though further details have not been revealed.
The OnePlus Turbo 7 Pro is expected to launch in December alongside the base OnePlus Turbo 7, according to the source.











