Xiaomi 18 Pro Max, Digimart Global: According to Xiaomi’s published spec sheets, the global version of the Xiaomi 18 Pro Max has a less capable Wi-Fi configuration than the Chinese model and does not list ultra-wideband (UWB) support. The global model also carries a smaller 7,050 mAh battery, compared with the 8,500 mAh battery of the Chinese version.
The Wi-Fi difference comes down to antenna configuration. Xiaomi’s Chinese spec page lists 2×2 MIMO on the 2.4 GHz band and 4×4 MIMO on the 5 GHz band.
The global spec page lists only 2×2 MIMO for Wi-Fi, with its 4×4 MIMO entry referring to cellular connectivity. Both pages share Wi-Fi 7, Multi-Link Operation, Bluetooth 6.0 and the same codec support.
The chip behind these specs helps explain the gap. Both versions use the Snapdragon 8 Elite Extreme Gen 6, which Qualcomm pairs with its FastConnect 8800 connectivity system.
That lineup includes two companion chips: the WCN8841, limited to 2×2 MIMO and Bluetooth 6.0, and the WCN8851, which adds a second Wi-Fi radio path for up to 4×4 MIMO at 320 MHz, along with Bluetooth 7.0 and UWB.
According to Weibo blogger Fei Wei, both Chinese Xiaomi 18 Pro models use the WCN8851 and support UWB, with the 18 Pro Max also supporting 4×4 MIMO. The published connectivity specifications for the global Xiaomi 18 Pro series, however, match the lower-tier WCN8841, suggesting Xiaomi may use that chip in the global models.
The same blogger reported that the OnePlus 16, iQOO 16 and RedMagic 12 Pro+ also use the WCN8841.
The distinction matters for peak speeds. At the same channel width, a 2×2 link has half the theoretical peak throughput of a 4×4 link, and Qualcomm’s 11.6 Gbps figure for the FastConnect 8800 requires the 4×4 configuration.
Xiaomi has not confirmed which chip the global models use, so the connectivity difference is based on spec-sheet comparisons rather than an official explanation.













