Convert bench grinder to metal polisher, Digi Mart USA News: A publisher article from House Digest describes how a stationary bench grinder can be converted into a metal polisher. Metal polishers are used to protect metal items against corrosion, prepare surfaces for coatings, improve appearance and remove slight manufacturing flaws or minor damage.
The article notes that a dedicated metal polisher may cost $70 or more, so the conversion is presented as a way to save money.
According to the article, a YouTube creator known as Vintage Boulton converted a 3/4-horsepower bench grinder inherited from family members. The publisher says the process is one many DIYers could manage, though it may be a challenge for people with limited tool experience.
Hobbyists working with metal parts and people doing restoration work may also be interested in the conversion.
The first step described is removing the bench grinder’s guards, which protect the user from injury when using abrasive wheels. The article says to loosen the guard bolts and fasteners with the correct wrench size, then remove the grinding wheels from the posts.
The fasteners already removed may be enough to dislodge the grinding wheel.
Next, threaded adapters are screwed onto the bench grinder spindles to hold polishing wheels in place. The article says these adapters can be bought at some hardware stores or on Amazon for roughly $10 to $20 for a pair.
Users should measure the spindle diameter and select a matching adapter, typically secured with grub or set screws. The article specifies a left-threaded adapter for the left spindle and a right-threaded adapter for the other side.
With the adapters in place, the polishing wheel’s threaded center hole is spun onto the adapter. The article warns that mismatched sizes may cause the polishing wheel to wobble, and says some units may require an added nut.
It also suggests keeping one grinding wheel in place if the user still wants a grinding option, and adding a polishing wheel to only one side.
When choosing a polishing wheel, the article advises checking its diameter, since oversized wheels may contact the workbench, and checking its maximum recommended revolutions per minute (RPM). Running a wheel too fast could leave discolorations on the metal being polished.
The article also stresses that bench grinders and metal polishers are potentially dangerous, as high-speed wheels can throw loose pieces or cause a polished item to be lost from grip, and recommends safety goggles or a face shield at all times.









