string lights nail hack to prevent sagging, Digi Mart USA News: Outdoor string lights can add a warm glow to a backyard fence, but a strand that sags or falls can quickly lose its appeal. According to a publisher article from House Digest, a simple fix uses a row of nails and a hammer to hold the lights in place.
The method starts by hanging nails along the fence, with enough nails to support the full length of lights. The cord is draped over the first nail and wrapped around it once or twice before moving to the next nail.
According to the article, this stops sagging and reduces the risk of the lights falling, and the lights can be removed by unwinding the cord from each nail without special tools.
The article advises using nails with large heads, such as common nails, roofing nails or drywall nails. Brad or finishing nails may not hold the cord if the nail droops, because their heads are not wide enough to keep the cord from slipping off.
Driving the nails in at a downward angle, with the heads pointing toward the sky, is also suggested to help keep the lights from sliding if the fence is shaken by weather.
The technique is described as suitable for most light types, though the article warns that the hanging strands on icicle lights should be moved out of the way before the cord is wrapped around a nail. It is not recommended for roofs or gutters, because nail holes can cause wood and other building materials to split over time.
For those areas, the article suggests light clips or clamps, such as commercial-grade light clips, which are designed to be gentler on a home’s exterior.
The article also cautions that any light string with a damaged cord, where wiring beneath the plastic sheath is exposed, should not be hung at all, regardless of the method used.











