Nextool W20 Pro ratchet multitool, Digi Mart USA News: Nextool has introduced the W20 Pro, a midsize multitool that combines an adjustable ratchet wrench with a full set of pliers and a bit driver, according to a New Atlas report published on November 5, 2026.
The core of the tool is a crescent-style wrench with a 1-inch (25-mm) jaw opening adjusted by a knurled thumb screw. A switchable ratchet function releases the wrench head so a bolt can be loosened in tight spaces by cranking, then spinning the wrench freely backward for the next turn.
Flipping the wrench reverses the ratchet direction for tightening.
When more gripping force is needed, the wrench handle splits open and swivels to reveal needle-nose and regular pliers jaws along with wire cutters. The bases of those jaws form an electrical crimper inside the handles.
A 1.7-inch (43-mm) straight blade and a file fold out from the handle base, and the tool can be turned upside down for use as a knife or file.
The bit holder arm folds out from the upper part of the wrench handle. It can be set at 90 degrees in wrench mode or extended into a long, straight driver configuration in plier mode.
The 4-mm hexagonal bit holder includes a dual-ended Phillips #2/slotted 3.5-mm bit. A pry bar is built into one handle and the tool includes a pocket clip.
At 6 ounces (172 grams), the W20 Pro is heavier and more robust than the lighter W20 while being lighter and slimmer than the 11-ounce (313-gram) W40, which has a fold-out saw and an additional plier jaw function. The tool is priced at US$50, between the US$60 W40 and US$33 W20, according to the report.
